Filler Masterbatch For Blow Molding


General applications: Duct work, fuel tanks, and water tanks, overflow bottles, and recycle bins, HDPE bottles, containers, cans.

Customizable Filler Masterbatch for Blow Molding


The higher thermal conductivity and lower specific heat of calcium carbonate are key advantages in molding applications


Laminating Filler Masterbatch Granules

Compatibility: PP, PE, LDPE, HDPE, LLDPE

Blow molding is a specific manufacturing process by which hollow plastic parts are formed and can be joined together. The majority of bottles, barrels, and containers are manufactured by blow molding. The most common plastic parts made with the blow molding process are bottles. Some parts can be converted from rotational molding to blow molding.

The grade types and description of filler masterbatch granules for blow molding.

Packaging & Delivering

Packaging
Depend on the requirement of clients, we have two type of delivery
  • 25 kgs per PE bag
  • 1100kgs/jumbo bag
NOTE: The type of packaging is up to the requirement of clients as under the trademark of FillPlas Co. or other one in the contract.
Delivering
Depends upon your C/O, L/C or proforma invoice, the delivery will take around 3 to 7 days. However, our supply chain will always put your processing as it is our first priority.
Storage
  • Our Filler Masterbatch plastic granules are quite sensitive to be moisture
  • Storing in original packing bags is acceptable
  • Please pay attention to the due of using after open the packing bags, the most appropriate time is making to use immediately after opening the product bags.
  • In the case, the products have some moisture problems, please dry them out by hot air recycle machine with degree around 90 Celsius degree into a half of an hour or you can give out 1% desiccant filler masterbatch before making to use

FillPlas

Thank you for filling out our form. We will contact you shortly!
Register Now
error: